VIATERRA JACKET FENDER BLACK
VIATERRA JACKET FENDER BLACK
What's included with the product?
- 1 Fender urban mesh riding jacket + B100 base layer top
- Powertector Shoulder Level 2 armour set
- Powertector Elbow Level 2 armour set
- Powertector Back Level 2 armour
- Powertector Chest Level 2 armour (can be bought separately)
PRODUCT SPECIFICATIONS
Things to keep in mind to ensure the measurements are taken correctly -
It will be helpful to have a family member or a friend take the measurements - Please use flexible tape only, like a tailor’s tape - All the measurements must be in the same units, whether cm or inches - You should preferably be wearing base layers while taking measurements, and avoid anything bulky
STEP 1 -
Measure using a tailor's tape There are two key measurements that you need to take into consideration for figuring out your jacket size.
A) Chest -
Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.
B) Waist -
Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.
STEP 2 -
Find your jacket size by checking measurements against the size chart provided.
- If both the measurements do not fall in one particular size - use the larger of the two measures to choose the jacket size.
- If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference. Remember, each brand has its own body size charts, so do check the chart before you select the size.
The placement of armour in your riding jacket is just as important as the type of armour used. The Fender Jacket comes with the full complement of Powertector SEB CE Level 2 armour that offers superior impact protection.
We achieved this by using a combination of a special blend of mesh and fabric in the construction of the jacket, as well as by using premium PowerTector Level 2 protectors for the elbows, shoulder and back.
Try one on today, and you will immediately understand what a huge difference this makes to the comfort of the rider. The Fender is designed to allow maximum ventilation in all key areas as determined by the body heat map.
We even made sure that the inner lining of our jacket pockets are made of mesh so that it does not inhibit the flow of air when you're on the move.
RETURN & EXCHANGE
Risk Free Trial:
Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our jackets, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 3 days from the date of delivery. And no, you don’t need to pay for the return shipping. Please write to us on contactus@viaterragear.com if you have any further queries or need clarifications.
Free Size exchange:
Worried about the wrong size if you buy online? You can exchange for size within 3 days from the date of delivery at ZERO cost – yup, we will get the jacket picked up from your address and send a replacement once we receive them in an unused condition. Please write to us on contactus@viaterragear.com if you have any further queries or need clarifications.
SPECIFICATION
Impact protection:
Level 2 Armour for superior protection - Powertector armours designed with special BioElastan material that hardens on impact while absorbing the energy yet remains soft & flexible under normal conditions.
CARE & STORAGE
IMPORTANT NOTE:
Body armours/ protectors must always be removed before starting the washing process
CLEAN & CARE:
For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER) DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
For longer life of the fabric, we recommend hand washing the jacket using mild detergent. Do not place your jacket near, or come in contact with a direct heat source. Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax
STORAGE: Make sure your jacket is completely dry before you store it on a hanger.
If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage Do not store the jacket in air-tight plastic bags
YKK Zippers -
Original YKK zippers & pullers for extra durability and smooth operation of zips.
Ergonomics designed for riding position.
CrossFlowTech - Comfort and ventilation during long rides
WARRANTY & REPAIRS
Warranty
We provide a 12 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click on Warranty policy and choose the relevant category for further details.
Repairs
Minor repairs of opened stitches, tears, velcro etc due to normal wear and tear can be done at a reasonable charge. Send us an email with pictures so we can determine if the jacket can be repaired or not. Please write to us on contactus@viaterragear.com if you require any help with repairs or have any questions!
LEGAL METROLOGY DATA
Product name: FENDER – URBAN MESH RIDING JACKET with base layer
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes
Customer Support
For customer complaints and support, email or call us:
- Customer Care Contact: 0253 2996744
- Email Id: contactus@viaterragear.com